The correct maintenance and upkeep of the KMS series generator set water tank is of great significance for ensuring the normal operation and prolonging the service life of the generator set. The following are specific methods and precautions for water tank maintenance and upkeep:
一、 Cleaning KMS series generator set heat sink
1. External cleaning:
Regularly clean the radiator with clean water or hot water mixed with cleaning agents to remove dust and dirt from the surface and ensure effective heat dissipation.
2. Internal cleaning:
When scale or sediment is found inside the radiator, the water inside the radiator should be drained completely, and then a certain pressure of clean water should be used to pass through the radiator core until the water flowing out is clean. If the scale is difficult to clean, a certain acid solution can be used for cleaning, then neutralized with a certain alkaline solution, and rinsed clean with water.
二、 Maintain the cooling system of KMS series generator set
1. Check the water tank and pipes:
The KMS series generator set water tank and pipes should be regularly inspected for leaks or damage, and if so, repaired or replaced in a timely manner.
2. Check the coolant:
Regularly check the coolant level and replenish it in a timely manner to ensure that the liquid level is within the normal range. At the same time, pure water or coolant that meets the requirements should be used, and sources with high impurities such as well water and groundwater should be avoided.
三、 KMS series generator set water tank daily usage precautions
1. Regularly check the pressure cap:
The pressure cover is equipped with steam valves and air valves, which should be regularly checked for proper operation to ensure that the system pressure is within the normal range.
2. Pay attention to the water temperature:
When the diesel engine is running under heavy load, do not open the pressure cap of the water tank to avoid burns. After parking, the pressure cap should only be unscrewed when the water temperature is below 70 ℃.
3. Add water after parking:
When adding coolant to an empty cooling system, it should be done after the diesel engine has stopped to avoid damage to the equipment caused by high temperatures.
The correct maintenance and upkeep of the KMS series generator set water tank includes cleaning the radiator, maintaining the cooling system, and daily usage precautions. By regular inspection and timely maintenance, the normal operation of the water tank can be ensured, and the stability and reliability of the generator set can be improved.
More KMS series generator set information:http://www.baidufadianji.com/
